Cold Applied Tape

INTRODUCTION

Innovative Tapecoat Gray tapes are engineered to exceed all previous performance criteria for protection from corrosion of above and below ground pipelines, joints and fittings. These cold applied, VOC-free tapes incorporate an integrated primer and stand alone as an easily applied corrosion protection.

Tapecoat H35/H50 Gray

Tapecoat H35 Gray and Tapecoat H50 Gray are designed to protect above and below ground metal surfaces from corrosion and electrolysis. They are used for coating pipe, pipe joints, fittings, couplings, tanks, pipe type cable, conduit, tie rods, elevator casings and other metal surfaces. Their unique MAF backing has been specially formulated to provide strength that allows it to be pulled tightly around fittings and other irregular shapes with minimal pull back due to memory. Tapecoat H35 Gray and Tapecoat H50 Gray employ an integrated primer and are resistant to UV rays, thermal expansion, impact and abrasion. Both tapes can be applied over a wide range of ambient temperatures. The application of liquid primer is not required.

Composition: Tapecoat H35 Gray and Tapecoat H50 Gray are composed of a Gray specially formulated MAF backing with a synthetic elastomeric adhesive. Laminated to the adhesive is an integrated primer. This primer is kept from permanently bonding to its backing (while in the roll) by a tough, easily removed polymer release liner which prevents contamination of the primer and adhesive prior to use.
Tapecoat M50/M65 RC Gray

Heavy-duty below ground pipeline recoating material in tape form with an integrated primer. Tapecoat M50 RC Gray and Tapecoat M65 RC Gray are designed to protect below ground metal surfaces from corrosion and electrolysis. It is used for coating pipe, pipe joints, fittings, couplings, tanks, pipe type cable, conduit, tie rods, elevator casings and other metal surfaces. Tapecoat M50 RC Gray and Tapecoat M65 RC Gray are resistant to thermal expansion, impact and abrasion and employ an integrated primer. The application of liquid primer is not required.


Composition: Tapecoat M50 RC Gray and Tapecoat M65 RC Gray are pre-formed, cold-applied coatings. The adhesive is manufactured from specially formulated elastomer and resins bonded to a woven highly puncture-resistant polymer. Laminated to the adhesive is an integrated primer. This primer is kept from permanently bonding to its backing (while in the roll) by a tough, easily removed polymer release liner which prevents contamination of the primer and adhesive prior to use.
Tapecoat 6025 Gray

Cold-applied coating in tape form for use in high temperature pipeline Tapecoat 6025 Gray High Temperature tape with a MAF backing is designed to protect above and below ground pipe, pipe type cable, pipe joints, fittings, tanks, insulated steam lines, and other metal surfaces from corrosion and electrolysis over a wide range of in-service temperatures up to as high as 250 degree F in constant or peak load operating conditions. Tapecoat 6025 Gray and TC Omniprime may be applied to new pipelines and to pipelines in service operating at elevated temperatures.

Composition: Tapecoat 6025 Gray is composed of a specifically formulated MAF backing and a synthetic elastomeric, temperature resistant coating